Close Ad

Bagged and bodied Tahoe on 22’s!

Hritik Godara February 10, 2023 Department

Mike Batty’s Alternative to the Chevy OBS Pickup

 While the popularity of OBS pickups continues to spike these days, some builders out there are looking to switch things up a bit by creating something a little different than the norm. Mike Batty of Vero Beach, Florida, is a big fan of ’88-’98 Chevy pickups, but he didn’t want to add yet another truck to the show fields in his region. Instead, he selected another Chevy alternative of the same vintage—a ’95 four-door Tahoe that he was eager to smooth out and slam to the ground. 

It really is difficult to not be a big fan of the OBS-era GM SUV models, especially when they’re laid out on a nice set of wheels. The Suburban of this same period would also be a great choice to build instead of the Chevy pickup, but there is just something about the more compact and boxy Tahoe that makes it an ideal candidate for a full rebuild—no matter if it’s equipped with two or four doors. Mike subscribed to this exact same sentiment as he began tearing into his ’95 about four years ago.

Altitude Adjustment

The first order of business was to address the Tahoe’s altitude, so Mike reached out to Kevin Dixon of Home Brewed Customs in Mooresville, North Carolina, to work his magic on the factory frame. Air Lift Dominator D2600 ’bags and KYB shocks were utilized on each corner, as was an Accuair VU4 4-corner manifold and SwitchSpeed controller to assist in adjusting the Tahoe’s ride height on the fly. To further increase its ride quality, Kevin built a custom back-half frame for the Chevy from the transmission back. Once that was completed, he performed a bodydrop to allow it to sit as low as it does when aired out.

Capitalizing on his Tahoe’s newfound slammed stance, Mike began sifting through multiple wheel options before landing on a set that stopped him dead in his tracks. Raceline’s Explosion 5 forged billet wheels are custom built to fit a truck’s individual specs, and in this case, 22×8.5-inch wheels were an ideal size for the front and wider 22×10-inch units were chosen for the back, which required the rear drive axle to be narrowed 6 inches by Jimmy’s Rod ‘N Customs. Pirelli P Zero Nero ultra high performance tires were used to cover the high-end billets for an equally sporty appearance and all-season drivability.

Less-is-More Exterior

For the exterior, Mike was looking to stay within the whole “less is more” realm. To help massage the Tahoe’s panels and prep them for paint, Scott Refice of Intense Works tackled the bodywork the Chevy needed as well as adding more custom touches, such as shaving the door handles, roof rack, and fuel door. A specially mixed dark blue paint color was soon applied, but to really bring out the most of the new paintjob, Jason Feltham of Feltham Fabrication concocted a multi-color mini-truck inspired graphic that adorns the center of the hood and onto the dash inside the cab for a slick stroke of individuality. From there, Mike kept the exterior accessories relatively streamlined by only adding RZ custom headlights, LED tails, and a throwback Trenz billet grille.

Touch-of-Class Interior

Moving inside the Tahoe, Robert and Dylan Doerr of Robert Doerr Upholstery added a fresh set of buckets from Snowden Seats. The upholstery options were narrowed down to a tan Rolls Royce leather and suede combo that adds an elevated touch of class to the interior space. The inner quarters really were a joint effort as Scott Refice clocked back in to create a custom center console and door panels for the interior, while Jason Feltham also made a return appearance to fabricate custom rear panels for good measure.

…there is just something about the more compact and boxy Tahoe that is an ideal candidate for a full rebuild… 

Mike was able to source and squeeze a 1959 Impala dash into place, which sports the aforementioned paint graphics but has also been stuffed with Dakota Digital RTX gauges and a Raceline Explosion steering wheel. With so much more room to work with inside the Tahoe, a complete JL Audio sound system was wired up—complete with front and rear speakers, an 8W7 subwoofer, and the right amps to feed the suggested juice to them for optimum thumping power.

While the factory 5.7L V-8 is still intact under the hood, it has seen some healthy upgrades in the way of Hooker short tube headers, a 3-inch exhaust system and Flowmaster muffler for better breathing abilities. Mike has hinted that he would be game for an LS swap sometime in the future, so we’ll see if he takes the plunge with that upgrade sooner than later.

Four Years, Zero Corners Cut

Mike is a proud member of the Aftermath truck club, and made sure to stick to their collective “Quality Over Quantity” motto with the build of his Tahoe. The build process spanned a total of four years, and the outcome of this project took every bit of that time because absolutely zero corners were cut. Mike believes in doing things right the first time, even if that means having to practice extreme patience when problems arise.

While nothing comes easy with builds of this nature, Mike saw his Tahoe through and now has a cool 90’s era Chevy to cruise around town in. It has enough retro styling without going overboard to serve as a fantastic example of that old school Y2K style that got a lot of us hooked on the whole custom truck scene to begin with.


TRUCK SPECS

 Owner 

Mike Batty
1995 Chevy Tahoe
Vero Beach, FL
Aftermath

Engine & Transmission

  • Stock 1995 Chevy V-8 5.7L
  • K&N air intake
  • Hooker short tube headers
  • 3-inch exhaust system
  • Flowmaster muffler
  • Custom aluminum driveshaft
  • Rear axle narrowed six inches by Jimmy’s Rod ‘N Customs, Edgewater, FL

Chassis & Suspension 

  • Shop: Kevin Dixon @ Home Brewed Customs
  • Factory frame
  • Body dropped
  • Back half from transmission back
  • Air Lift Dominator D2600 ‘bags
  • KYB shocks
  • Accuair VU4 manifold and SwitchSpeed controller
  • Aluminum 15-gallon fuel cell

Wheels, Tires & Brakes 

  • 22×8.5 and 22×10 Raceline Explosion 5 wheels
  • 245/30/22 and 265/30/22 Pirelli P Zero Nero tires
  • Factory brake system

Body & Paint 

  • Shop: Scott Refice @ Intense Works, Panama City, FL
  • Custom blue Nason by Axalta paint mix by Carma Franklin
  • Mini-truck style graphics painted by Jason Feltham at Feltham Fabrication, Deltona, FL
  • Shaved door handles, roof rack, fuel door
  • Full tubs custom made by Intense Works
  • Sectioned front bumper
  • Custom rear roll pan
  • Legacy 40×85 sliding ragtop
  • Trenz billet grille
  • RZ customs headlights
  • LED taillights

Interior & Stereo 

  • Shop: Robert and Dylan Doerr @ Robert Doerr Upholstery, Sebastian, FL
  • Snowden bucket seats
  • Rolls Royce Tan leather/suede upholstery
  • Dakota Digital RTX gauges (1959 Impala dash)
  • Raceline Explosion steering wheel
  • Ididit steering column
  • Clayton Machine door handles and billet accents
  • Custom billet parts from Tom @ Billet and Acrylic Fantasies, Vero Beach, FL
  • Custom center console, custom door panels, custom rear by Scott Refice @ Intense Works
  • Interior rear panels by Jason Feltham @ Feltham Fabrication
  • Custom rear wood floor
  • JL Audio speakers and subwoofer

 

SHOW US YOUR RIDE!

UPCOMING EVENTS!

  • Mar 02

    The Wharf

    Orange Beach Invasion

  • Mar 14

    Moab

    Easter Jeep Safari

  • Mar 17

    Daytona International Speedway

    Jeep Beach

  • Mar 26

    Las Vegas Motor speedway

    LS Fest West

ADD YOUR EVENT!