Since the Willys reproduction era began, there have been many very fine examples of the street coupe, but perhaps none is more impressive and intimidating than that owned by the Jordan Family collection of Orange County, California. For Joshua Jordan, seeing this Willys was love at first sight. The family owns a stable of outstanding rods, customs and classics, but this monster of a street machine has a dominant aura. And why wouldn’t it? This is a killer build through and through.
The original construction took place more than a decade ago. Using an Antique & Collectible Autos high-quality shell, it was mated to a specially constructed tube frame chassis. A narrowed Ford 9-inch rearend was set up with parallel 4-link arms with coil-over shocks. Right from the get-go it was decided that this was going to be a beast worthy of its iconic status.
The first order of business was to go big, as in big-block. Noted engine builder Wayne Halabura assembled a 454 Rat motor punched out to 513 ci. Next 9.5:1 TRW pistons were added to the solid steel crank. A B&M 420 Mega Blower was added with a pair of Edlebrock four-barrel carbs. Everything was either plated or polished and all lines were braided steel with aircraft fittings. The goal was to exceed 1,000 hp. Actually dyno numbers confirmed the beast’s potential.
There was no intent to make the Willys cruise night friendly. The locker-style rear axles were mated to 4.10 gears. The performance-built GM Turbo 350 trans was also beefed up to handle the additional stress. If you’re going to do something, it pays to do it right. Nothing was more correct than custom-made Budnik wheels with Mickey Thompson 26×15 Sportsman rear tires. The fronts are Dunlop 15×6 radials.
Next on the to-do list was the interior. A multi-point cage was custom made and color matched. The Recaro bucket seats were modified and covered in ivory and blue leather. A custom center console was fabricated, as were door and cab panels. The cab was carefully traced out so matching leather-covered panels could be fitted into place. A tilt steering column with a Budnik wheel and billet stems provide the controls. Pile carpet was laid down and billet door handles finished the job. The custom-made dash is the result of hours of fabricating, fitting, smoothing and finishing in matching PPG paint. It was married to Dakota Digital gauges behind smoked Plexiglas.
The body was sanded to glass-like smoothness. Then, it was primed and graphite sprayed to reveal any and all imperfections. Next it was back for additional hand sanding prior to being sprayed with two-stage PPG Blue Wave Metallic for the exterior color, a hue akin to that used on the famous Stone, Woods & Cook gasser.
The Willys was returned to Rick’s Auto Restoration in El Cajon, California for additional interior modifications. The aluminum gas tank was sealed before being covered in leather and topped with a competition flip cap. Gas pressure lifts were polished and a long list of detail items were handled.
While at Rick’s, a 3-inch exhaust system was custom made and installed featuring side-exit paths and plated tapered tips. While testing out the exhaust note, a half-throttle run up a nearby freeway onramp revealed a glaring issue: torque lift, also known as pulling the front wheels off the ground. This was nothing a proper set of wheelie bars couldn’t solve, but common and proper are two different things. Off the rack would work, but custom tailored was better. A special unit was handcrafted using precise spring tensioning, and all components were chrome-plated and polished to perfection, of course.
For a final touch they had Mark Brink, a custom painter known for his innovation and quality work, come up with a ribbon overlapped with flames. The subtle, yet effective design was applied on a tamped angle from the hood’s point to the body’s beltline, culminating with a final lick that is in concert with the rear fender contour. That was it. No accenting pinstripes or designs were needed—neat, clean, perfect. Once Brink had done his act, the entire body was cleared once again, cut and buffed.
With 1,000 hp sitting just a gentle push away from the right foot, and an equal amount of hours going into the build, you’d think this wild ride would become a trailer queen. The fact is it participated in a cross-country Americruise, as well as regional legs of a Power Tour. There was a bit of detuning and a gear change to bring the fuel mileage up to 10 mpg. But, once the events were over, the optimum pulleys and gears were reinstalled to once again make this a wolf on Main Street.
Building a ’41 Willys is a tightrope affair, especially one that dares to have any visual connection to one of history’s famous drag cars. However, the Jordan family collection offers such a ride. Wherever it’s shown, this high-end build has the ability to create new memories and join the list of iconic Willys coupes.
Editor’s Note: A version of this article first appeared in the December 2016 print issue of the Drive Magazine.