Compiled by Staff November 22, 2022 All Feature Vehicles
Improve the handling, styling and braking capacity on your 1973-1987 Chevy/GMC C10 pickups with Wilwood’s 2.50” drop ProSpindle and disc brake upgrade kits. Your 1963-1972 models that have been updated with the later model ball joints are covered too. A safer, sturdier and more lightweight alternative, ProSpindles feature forged aluminum bolt-on steering arms and forged aluminum knuckles with fortified caliper mounting bosses for the full range of Superlite and Aerolite disc brake kit options. The modular late model style bearing and hub assembly is multi-pattern drilled to accommodate both the 5 on 4.75” and 5 on 5.00” wheel lug mount patterns.
Aeromotive has an all-new belt-drive EFI regulator, now with -12 ports. The new regulator, part number 13137, is designed for use with both a belt and a hex-drive fuel pump. It has two AN-12 ports and an AN-12 return port, along with dual springs that expand operating pressure range while maintaining a low profile and reduced weight. The standard spring (installed) supports a 30-75 psi base, while the high-pressure spring (included) supports a 75-120 psi base. The regulator supports a 1:1 vacuum and boost reference.
Swapping an overdrive manual transmission into a classic hot rod or musclecar is a smart way to increase fuel economy and improve highway drivability. Problem was, those transmissions are pretty chunky, so the swap involved a lot of hacking and fabrication.
McLeod’s new Musclecar 5 five-speed changes all that. It provides that all-important overdrive gear in a smaller, more compact package. The case is small enough to fit nicely inside most transmission tunnels, which virtually eliminates expensive or tricky modifications.
The Musclecar 5 has synchronized 8620 forged gears that allow the transmission to handle up to 500 ft.-lbs. of torque. The Musclecar 5 features a 2.95 first and 0.63 fifth gear, ideally suited for street cars. An internal rail shifter delivers quick, smooth, actuate shifting, and the transmission uses the common GM 32-spline output shaft—identical to a GM TH-400. Get it through Summit.
Total Control Products patented line of high performance center-take-off rack and pinions enables correct geometry and a level of positive, direct steering that is not possible with adapted OEM units. Both manual and power versions feature quick ratio, straightcut gears, requiring only three turns lock-to-lock. The unique modular design utilizes an assortment of mounting brackets and centerlinks to adapt to various classic Ford/Mercury vehicles including Mustangs, Cougars, Falcons, Comets and Rancheros.
Total control products
This kit comes with all you need to install a 6R80 transmission in any 79-98 Mustang/Cobra. At the core of the kit is Stifflers single tube crossmember. Add to that a set of adjustable bolt-on mounting brackets that allow the optimum placement of the crossmember with no modifications required. Top all that off with a custom designed multi-adjustable transmission mount with integrated polyurethane bushing and you have the 6R80 Install Kit!
Vintage Air has released its all-new ProLine Louver Balls for 1965-1977 GM cars and trucks equipped with factory air. These CNC-machined billet aluminum louver balls are drop-in replacements for the round factory vents and replace the plastic originals. The new GM ProLine Louver Balls are precision CNC machined from T-6061 billet aluminum and come in the factory 3.050-inch diameter. They deliver maximized air flow and stylistic designs that will complement your stock dash and are multi-directional, rotating with ease within the aluminum bezel.
Editor’s Note: A version of this article first appeared in the December 2016 print issue of the Drive Magazine.